Case study

UV BRUSH HOLDER

A closed toothbrush case that runs a timed UV-C cycle on the brush head, with lid detection and a safety cut-off.

Personal careEnclosure · UV-C board · Firmware · Interlock
This project is under NDA; full technical detail cannot be disclosed.
UV Brush Holder open with a toothbrush under UV-C light, mounted beside a bathroom sink
The product

WHAT WE BUILT

A closed case that holds a toothbrush and runs a timed UV-C cycle on the head while it is stored. It has a hinged lid, a moulded cavity with a brush retainer and drip channel, and a front panel with a two-digit display, a cycle indicator and a single power key.

Our reading · three parts that had to work as one
Case and lidHinged lid, brush retainer, drip channel
UV-C systemEmitters placed over the bristle zone
Controls and safetyLid detection, cycle timing, safety cut-off
How we delivered it

TWO STAGES, ONE TEAM

Auto-playing · hover to pause
Case closed, wall mountedFront panel with the two-digit displayCase closed, wall mounted
Stage 01 of 02

Industrial design & enclosure

We designed the enclosure and hinged lid, and the moulded cavity with its brush retainer and drip channel. We placed the UV-C emitters over the bristle zone.

What we did
Enclosure designHinged lidBrush retainerDrip channel
Photos and renders

GALLERY

UV Brush Holder standing closed with its display lit
UV Brush Holder standing closed with its display lit
UV Brush Holder on a wooden surface
UV Brush Holder on a wooden surface
UV Brush Holder closed beside a bathroom sink
UV Brush Holder closed beside a bathroom sink
Close-up of the closed case and front display
Close-up of the closed case and front display
Questions founders ask

FAQ

Can Inventornest build a UV-C personal care device like this?

Yes. One in-house team takes first-of-a-kind products from feasibility and design through electronics, firmware, prototyping, certification and manufacturing. We have built 200+ products across 30+ industries.

Why can't you share more technical detail?

Every engagement is under NDA, and the client owns the IP. We publish only what the client has allowed us to show.

Is my idea protected when I talk to you?

Yes. After a free 30-minute consultation we sign a personalised NDA with you. You keep full ownership of the resulting IP.

Where would my product be manufactured?

We work with partner factories in China and Pakistan, with China first. Exactly what is produced and delivered is set out in the agreed scope.

Confidential. Shown with client permission under NDA. All IP remains the property of the client.

4.8 from 130+ client reviewsonFiverrandClutch

More personal care and home

RELATED CASE STUDIES

Have a product like this in mind?

Start with a free 30-minute consultation. After it, we sign a personalised NDA, and you keep full ownership of the resulting IP. Exactly what is delivered is set out in the agreed scope.