For technical founders

Hardware engineering for technical founders: we pick up your design where you left off, in your own files

You know what you're building. What you need is the next stage done properly: the board laid out for production, the firmware finished, the tests passed. We take the whole stage, work inside your files and repo, and hand it back done at a fixed price.

YOUR DESIGN · OUR STAGE · YOUR REPO
  • Your tools, your repo
  • Review before rewrite
  • Fixed price per stage
  • You own the IP

The short answer

Should I hire a hardware engineer or contract one?

Hire when the work is steady and core to your product for years. Contract when you need a stage done well and fast, or skills you'll only need for a few months, like RF, low power or certification. Many founders do both: they keep the architecture in-house and hand us whole stages, with the work landing in their own repo.

Free design review

Send us your design before you spend on boards

Share your schematic, layout or firmware under NDA. Our engineers look for the problems that usually surface only after the first boards come back, and tell you plainly what to change. The stages of the hardware development process show where those problems appear.

  • Power and battery
  • RF and antenna
  • EMC risks
  • Parts availability
  • Design for manufacture

A written list of the risks we find and a fixed quote to fix them. Free, with no obligation.

Working rules

Four rules we keep on every project

Your tools, your repo

We work in your own design tools and Git repo, not copies on our side.

Review before rewrite

We build on your existing design and only redo what really has to change.

You own the IP

The IP in the work we do for you is yours from day one, in writing.

Fixed price per stage

Each stage is quoted as a fixed price before it starts, never an hourly meter.

We work in Altium and KiCad, among other common design tools.

Whole stages, end to end

Hand us a stage and get it back finished

A circuit board with the main chip at its centre and the sensor, radio and power blocks wired to it

Stage 01 of 06

Architecture

Pressure-test the architecture, parts and unit cost before you commit.

Feasibility study

Connected device? IoT product designAI on the device? Physical AIEnclosure? Product design

Hire or contract?

What changes when you hire versus hand us a stage

QuestionHire an engineerHand us a stage
When the work stopsThe salary continuesThe stage ends and so does the cost
Specialist skillsOne person covers a few areasSpecialists for each stage
Test equipmentYou buy or rent itOurs, including in-house EMC pre-scans
Getting startedMonths to recruit and onboardStarts once you approve a fixed quote
Where the knowledge livesMostly in one person's headIn your repo, documented

Many founders hire for the core and hand us the stages in between.

Missing one skill?

The specialist skills founders most often need for one stage

RF and antennas Low power and battery life EMC and FCC Design for manufacture

Client reviews

What clients say

4.8from 130+ client reviews
their dedication, hard work, and creativity have been nothing short of inspiring
Client · Engineering team · USA
Hassan exceeded expectations with his work on my smart water bottle project.
Client · Smart water bottle · Canada

FAQ

Questions technical founders ask us

Do you work in our Altium or KiCad files?

Yes. We work in your own design tools and Git repo, so nothing has to be converted or copied back.

Who owns the design and the IP?

You do. The IP in everything we do for you is yours from day one, in writing.

Can you take over a half-finished design?

Yes. We review it first, keep what works and only redo what has to change.

Can your engineers join our team as extra hands?

We take on whole stages end to end rather than adding individual engineers to your team. You stay in charge of the architecture and approve each stage.

How is a stage priced?

As a fixed price, agreed before the stage starts. If the scope changes, we quote the change before doing it.

What does the free design review include?

We review your schematic, layout or firmware for power, RF, EMC, parts and manufacturing risks, and send a written list with a fixed quote to fix them. Timing matters here: see when to start design for manufacturing.

Will you sign an NDA?

Yes, before you share any files.

Can you work alongside our in-house engineer?

Yes. We work in the same repo and tracker, and your engineer reviews and approves each stage.

Start here

Tell us about your idea

Share as much or as little as you like. An engineer reads every enquiry and replies within one business day, under NDA before you share details.

About you01 / 03
Your idea02 / 03
Budget and files03 / 03
Files or sketches (optional)
I agree that Inventornest may contact me by email, phone or WhatsApp about my enquiry, and store the details I have submitted. Privacy policy

We record how you found us (such as the page you came from and campaign links) and use analytics to improve our website. We never sell your details, and you can ask us to delete them at any time.

* Required fields