Free consultation and roadmap guidance for first-time founders. Talk your first product idea through with our engineers.Get my free consultation →

How Long Do Kickstarter Campaigns Last? Campaign vs Delivery Time

A Kickstarter campaign can last 1 to 60 days, and Kickstarter recommends 30 days or fewer. For hardware, delivery takes far longer: Kickstarter’s own guide says fulfillment usually takes about a year after the campaign ends.

Key takeaways

  • A Kickstarter campaign can run from 1 to 60 days, and Kickstarter says projects lasting 30 days or fewer have the highest success rates.
  • You cannot change the deadline after launch, so pick the end date and time before you go live.
  • For hardware, the campaign is the short part. Kickstarter’s own fulfillment guide says delivery usually takes about a year from the day the campaign ends.
  • Unfinished engineering at launch adds months to that year, so the safest campaign starts with a working, tested prototype.

A Kickstarter campaign lasts anywhere from 1 to 60 days, and the creator picks the length before launch. Kickstarter recommends 30 days or fewer, because projects in that range have the highest success rates (Kickstarter Help Center).

For a hardware product, campaign length is the easy decision. The harder question is how long backers wait after the campaign ends. Kickstarter’s own creator guide says fulfillment “usually takes about a year from the day your campaign ends” (Kickstarter). This guide covers both clocks: the days your campaign is live, and the months it takes to ship.

Kickstarter campaign length rules at a glance

The platform rules are short. The table sums them up.

Rule What it means for you
Minimum length: 1 day Possible, but only useful with a large audience ready to back on day one
Maximum length: 60 days The hard ceiling; longer campaigns are not allowed
Recommended: 30 days or fewer Kickstarter reports the highest success rates in this range
Deadline after launch Fixed. You cannot extend or shorten a live campaign
Funding model All-or-nothing. Backers are charged only if you reach your goal

Kickstarter lets you set the length as a number of days or as a fixed end date and time. A fixed time lets you end the campaign when your audience is awake and online, which matters for the final push.

Free template: every hardware cost from idea to first production run, with typical ranges →

How to choose a length for a hardware campaign

Kickstarter’s data shows a correlation, not a guarantee: creators who choose 30 days also tend to plan well. Use these points to pick a number.

  • A 30-day window keeps a clear deadline in front of backers, which concentrates pledges at the start and the end instead of stretching them thin.
  • A large pre-launch list supports a shorter campaign, because most of the funding arrives in the first days.
  • A longer campaign rarely fixes a weak launch. The middle of any campaign is quiet, and extra weeks mostly add more quiet days for you to manage.
  • The prototype has to be finished before day one. Kickstarter requires hardware projects to show a working prototype, as covered in our guide to Kickstarter hardware rules. A short campaign gives you no time to finish engineering while it runs.

If you are still deciding what that prototype must show, see what prototype you need before crowdfunding.

What happens in the weeks after the campaign ends

The money does not arrive on the last day. Kickstarter’s fulfillment guide says it needs about 14 days to process card charges, plus a few extra days to handle failed payments. Your bank can add more time before the funds appear.

  • Charges and failed cards: about two weeks, plus follow-up with backers whose cards were declined.
  • Surveys or a pledge manager: collects addresses, add-ons and shipping fees. Our breakdown of crowdfunding hardware costs covers what this line item costs.
  • Overall wrap-up: Kickstarter suggests treating this early post-campaign phase as four to eight weeks.

If the campaign misses its goal, nothing happens at all: backers are not charged and the creator receives no funds.

The real timeline: from campaign end to backer delivery

Kickstarter’s guide gives stage-by-stage planning figures. These are its figures, not ours, and they assume the design is finished when the campaign ends.

Stage after the campaign Kickstarter’s planning figure
Payments and wrap-up 4 to 8 weeks
Ordering and reviewing samples The first 4 to 8 weeks of production
Production run, electronics Closer to 12 to 16 weeks
Certifications such as FCC or CE marking Add 4 to 8 weeks
Chinese New Year overlap Add a month
Ocean freight, Asia to US 4 to 7 weeks, plus 1 to 2 weeks for customs
Warehouse receiving and fulfillment Days to a few weeks

Kickstarter’s guide puts the total at about nine months with overseas manufacturing and no delays, suggests planning for 12 to 15 months, and says complex products or products that need tooling can take 18 months or longer.

The campaign lasts weeks. The delivery promise lasts a year. Plan the year first, then pick the weeks.

Where hardware founders lose time

Kickstarter’s figures start when the design is done. Many hardware campaigns launch earlier than that, and the remaining engineering moves to the front of the delivery timeline.

  • Unfinished development. In our experience at Inventornest, a typical program takes approximately four months to complete the first prototype and around seven months to reach the mass-production stage. Complex products may take six to seven months for the first prototype and ten months to one year to progress to mass production. These are typical planning ranges, and they should not be read as the time to a first saleable unit.
  • Component procurement. At Inventornest, we find component procurement is a major source of schedule pressure. We include schedule slack and account for sourcing risk when selecting components.
  • Certification. In the FCC and RoHS work we have handled, external laboratory work has sometimes cost approximately USD 2,000 and taken around 20 days. Actual cost and duration depend on the product, test scope and laboratory, and can be higher or longer. That figure is the lab’s cost alone, not a complete client price or a universal certification package, and it does not apply to CE, UKCA, UL or medical-device certification. Kickstarter’s 4 to 8 weeks is a wider planning allowance for FCC or CE.

Our hardware crowdfunding readiness checklist lists what to have finished before launch so the delivery clock starts from a finished design.

Setting a delivery date backers can trust

Each reward on Kickstarter carries an estimated delivery month. Treat that date as a promise you build from the bottom up.

  1. Start from the stage table above, adding any engineering left to finish before production.
  2. Add slack for sourcing and certification, because those are the stages most likely to move.
  3. Check the calendar for Chinese New Year if your factory is in China.
  4. Post updates every two or three weeks, as Kickstarter’s guide recommends, with specific progress rather than general reassurance.

The campaigns that delivered on time tend to share one trait: the engineering came before the launch. Our review of successful hardware Kickstarter campaigns shows the pattern. For the full sequence from prototype to backer delivery, read how to crowdfund a hardware product.

Free templateBudgeting a hardware product? Start with every line.Every cost from feasibility to first production run, with typical ranges and the costs founders leave out. Read it free on the page, or download the PDF.
See the budget lines →

Frequently asked questions

What is the maximum length of a Kickstarter campaign?

Sixty days. The minimum is one day, and Kickstarter reports the highest success rates for campaigns of 30 days or fewer.

Can you extend a Kickstarter campaign after launch?

No. Once a project is live, the deadline and funding duration are fixed, so choose the end date and time before launch.

How long after a Kickstarter ends do creators get the money?

Kickstarter needs about 14 days to process charges, plus a few days for failed payments. Your bank may add more time before the funds appear.

How long does it take to receive a Kickstarter hardware product?

Kickstarter’s own guide says fulfillment usually takes about a year from the end of the campaign, and suggests planning for 12 to 15 months. Products that need tooling or more engineering can take longer.

Is a 30-day Kickstarter better than a 60-day one?

Kickstarter reports higher success rates for 30 days or fewer. The extra days in a longer campaign are usually quiet ones, and a shorter deadline gives backers a reason to act.

What happens if a Kickstarter campaign does not reach its goal?

Kickstarter funding is all-or-nothing. If the goal is not met by the deadline, backers are not charged and the creator receives no funds.

Where Inventornest fits

Most of the delay in a hardware campaign comes from engineering that is still open when the campaign ends. Inventornest works on that part. We always prefer to begin with feasibility, whether the idea is simple or complex, and we then develop the electronics, firmware and enclosure through to a tested prototype.

Our proposals specify deliverables, exclusions, timelines and payment milestones, so your delivery estimate rests on a defined scope rather than a guess. With 12+ years building hardware (since 2013) and 200+ products built, we can help you plan the engineering before you set a campaign date. Our crowdfunding product development page explains how we support founders preparing a campaign, and you can book a consultation to talk through your timeline.

Not sure what comes next?

Describe your product and we will tell you honestly which stage comes next, and what it would cost.

Book a consultation
Every engagement begins under NDA, and you retain full ownership of the resulting IP. Exactly what is delivered, and in which formats, is set out in the agreed scope.
Muhammad Mohsin Aslam, Founder and CEO of InventornestWritten byMohsin Aslam

Electrical engineer and Founder & CEO of Inventornest. He leads an in-house team covering industrial design, mechanical engineering, electronics, embedded firmware and manufacturing.

On this page

Book a consultation

Tell us what you are building. We will tell you which stage comes next.

Book now

Bring us the idea. We will tell you what it takes to build it.

Feasibility analysis, prototyping, design for manufacturing and certification, from one in-house team.

Book a Consultation
Keep reading

Related guides